CineTape AIR App

The official Cinematography Electronics CineTape AIR App is now ready to use. The App connects the CineTape 2 and AIR Mobile 2 with iPhones, iPads and iPods. Our App is designed with the same simplicity as our industry standard CineTape.

The measured distance is beautifully displayed in easy to read large red characters that mimic the CineTape 2. As a reference, the set units of Feet or Meters, is shown underneath.

Other App features include adjustable distance limits, Sensitivity and Brightness levels. The adjustable NEAR and FAR distance limits are shown in medium size yellow numerals. To change the NEAR or FAR limit setting, tap on the number and a popup adjustment wheel appears. Roll the wheel to fine tune the distance limit. Tap the number again to set the distance. Both the Near and Far settings work in a similar manner. Each can be set and switched on or off independently. This makes it possible to preset limits and activate or deactivate them during a shot.

The CineTape 2 Sensitivity can be changed directly from the App. Tap on the dotted line, in the Sensitivity section, to increase or decrease the Sensitivity. Each dot represents a 5% change. The new Sensitivity is displayed as a percentage along with the graphical dot representation. To confirm a change, the red distance display also momentarily flashes the changed setting.

The Brightness of the CineTape 2 is also adjustable from the App. Tap on the dotted line to increase or decrease the CTM Brightness.

CineTape AIR


CineTape AIR

For support and suggestions, please contact:

App Designer / Programmer - Thomas Barton


CineTape AIR

© 2017-2022 Cinematography Electronics Inc.